3DWallDecor - FAQ

You have a question about:

1.  Wall panels ; general information
2.  Sustainability  / environment
3.  Application
4.  Safety

1. Wall panels ; general information

What are the 3DWalldecor wall panels made of?
The eco-friendly wall panels are mainly made of bamboo paper pulp. Fire retardant, water repellent and starch containing materials have been added.

How many panels are in a box?
Each box contains 10 panels and covers 2,1m². Each panel measures 46 x 46 cm.

How thick are the panels?
Each panel is 1,5 mm thick.

What do the panels weigh?
Each panel weighs between 250 and 300 grams.

How do I clean the panels?
The panels can be conveniently dusted with a dry cloth. If necessary, you can even use a slightly moist cloth.

Are the panels hollow?
Yes. This way, they can easily be stacked during transport and the weight of each panel is limited.

Do the panels also improve sound?
3DWalldecor wall panels are primarily designed as wall decorations. Although acoustic improvements have been experienced, these effects have not been tested yet.

What colour are the 3DWalldecor wall panels?
The wall panels are a natural and standard off-while colour.

Why modular wall decoration?
Our three-dimensional wall panels can be used for small and large wall surfaces to create various 3D effects. Applying only a few wall panels to a specific part of a wall can also have a lovely and surprising effect.
If necessary, the wall panels are easily replaced. After application, the wall panels can be painted in any colour. It’s also possible to leave the panels in their original off-white state.

2. Sustainability  / environment

How sustainable are the 3Dwalldecor wall panels?
Once they have been applied, the wall panels are very sustainable. The corners of the panels are slightly fragile when not applied to a wall. Therefore, be careful when moving, storing and applying loose panels. The panels have the feel of solid fibreboard.

Are the wall panels environmentally friendly?
3D-wall panels are mainly made of bamboo paper pulp. Fire retardant, water repellent and starch containing materials have been added. Bamboo is a natural product, sustainable and environment-friendly and can be used as a raw material for all kinds of products.

3. Application

How do I apply the wall panels?
The panels can be applied either permanently or temporarily. For permanent application, we recommend using a (removable) montage glue or a strong wallpaper paste for heavy vinyl or other similar materials. Other glues for heavier wallpaper can also be applied to the back of the panels (only flat surfaces) – depending on the instructions of the supplier in question. If a temporary application is needed, we recommend double-sided foam tape.

How do I fill seams?
When using modular products, small seams may appear between panels after application. These seams can be filled using a paintable (acrylic) glue.

Can I cut the wall panels?
Yes, you can. Panels are best cut using a knife or a jig saw.
For the best result, cut the panels at a point where small irregularities are the least visible. For example, at floor level or where the ceiling begins. If necessary, you can use a fine sandpaper to smooth irregularities at the edges. Any unevenness between cutting edge and wall can be sealed with acrylic.

What kind of paint should be used?
Once the panels have been attached to the wall and treated with a primer, they can be painted. We recommend a matted latex paint, although other kinds of paint (both water and oil based) can be used. Any colour can be applied. Panels can be painted with a brush or a paint sprayer.

Can the wall panels also be applied to the ceiling?
Yes, this is possible. Use a good montage glue.

Are the 3DWalldecor wall panels moisture resistant?
Yes. However they should not come into direct contact with water. Application of wall panels in (bath)rooms where there is often a lot of steam is not advisable.

4. Safety

Are the panels fire retardant?
Yes, the fire safety of our panels has been assessed and we have an ASTM E 84 Class A certification. For European standards, these panels are classified as: Euroclass E. This certification means that the fire and smoke development is limited and remains within the European fire safety standards.

Do the wall panels meet European safety standards?
Yes, 3DWalldecor has had extensive safety testing carried out.
The wall panels meet all European standards with regard to; fire safety, water absorption, moisture resistance  and expansion rate under various conditions.

Can’t find your question?

Feel free to ask us your question using the contact form.